oslc-op@lists.oasis-open-projects.org | Integrating with Jazz - for a client without oauth support

Home Messages Hashtags Subgroups Calendar

Date Date 1 - 8 of 8

Integrating with Jazz - for a client without oauth support

Jad El-Khoury #1171 Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member
Jad El-Khoury #1172 Correction: Is it possible to connect Jazz to an OSLC Provider that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) toggle quoted message Show quoted text From: oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury Sent: Friday, 24 February 2023 14:56 To: oslc-op@... Subject: [oslc-op] Integrating with Jazz - for a client without oauth support Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member
Andrii Berezovskyi #1173 Hej Jad, Lyo has sample code that does this: https://github.com/OSLC/lyo-samples/blob/master/bin/test-jazz-samples.sh Though I only tested successfully EWM with Basic auth and know that ERM sample can’t handle Basic (yet wink wink). –Andrew. toggle quoted message Show quoted text On 24 Feb 2023, at 14:55, Jad El-Khoury <jad@...> wrote: Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member
Michael Rowe #1174 You should also look into details of JAS server, it supports multiple other Authentication methods. Take a look at the following post about the Jazz Authorization Server . https://jazz.net/wiki/bin/view/Deployment/AboutJazzAuthorizationServer
More All Messages By This Member
Andrii Berezovskyi #1175 Oh, did you mean to have Jazz connect to a non-oauth enabled OSLC endpoint? I misunderstood a bit. Let’s hear from the Jazz experts! –Andrew. toggle quoted message Show quoted text On 24 Feb 2023, at 15:00, Jad El-Khoury <jad@...> wrote: Correction: Is it possible to connect Jazz to an OSLC Provider that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) From: oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury Sent: Friday, 24 February 2023 14:56 To: oslc-op@... Subject: [oslc-op] Integrating with Jazz - for a client without oauth support Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member
Jad El-Khoury #1177 Thanks Andrii and Michael But yes, Jazz is the client this time. So, I Jazz, I need to setup the friendship to this other application (acting as an OSLC Server). The application is written in .Net (So all the Lyo-related libraries and code are of no use). Regards Jad toggle quoted message Show quoted text From: Andrii Berezovskyi <andriib@...> Sent: Friday, 24 February 2023 15:03 To: oslc-op@...; Jad El-Khoury <jad@...> Subject: Re: [oslc-op] Integrating with Jazz - for a client without oauth support Oh, did you mean to have Jazz connect to a non-oauth enabled OSLC endpoint? I misunderstood a bit. Let’s hear from the Jazz experts! –Andrew. On 24 Feb 2023, at 15:00, Jad El-Khoury <jad@...> wrote: Correction: Is it possible to connect Jazz to an OSLC Provider that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) From: oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury Sent: Friday, 24 February 2023 14:56 To: oslc-op@... Subject: [oslc-op] Integrating with Jazz - for a client without oauth support Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member
Gentry, Edward #1179 Hi Jad, Jazz has different options depending on whether the REST calls are incoming or outgoing from the perspective of Jazz. Incoming: e.g. GET a Jazz resource, POST a modified Jazz resource, GET a Jazz service provider catalog, etc Jazz auth : this is very much like Basic Auth just the Jazz way. It is well documented on Jazz.net OAuth 2.0: IF Jazz is configured to use the Jazz Authentication Server (basically a profile of the Liberty server) then you can use OAuth 2.0 to make call on the Jazz server. Outgoing: e.g. Jazz does a GET of a resource compact rendering, or Jazz does a GET on local configuration resource, or LDX/LQE does a GET of another TRS resource etc. OAuth 1.0A *and absolutely nothing else. This was underscored very strongly several months ago. Probably not good news … you might be SOL here … :/ Cheers, Ed toggle quoted message Show quoted text From:* oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury via lists.oasis-open-projects.org Sent: Freitag, 24. Februar 2023 15:41 To: oslc-op@... Subject: Re: [oslc-op] Integrating with Jazz - for a client without oauth support Thanks Andrii and Michael But yes, Jazz is the client this time. So, I Jazz, I need to setup the friendship to this other application (acting as an OSLC Server). The application is written in .Net (So all the Lyo-related libraries and code are of no use). Regards Jad From: Andrii Berezovskyi <andriib@...> Sent: Friday, 24 February 2023 15:03 To: oslc-op@...; Jad El-Khoury <jad@...> Subject: Re: [oslc-op] Integrating with Jazz - for a client without oauth support Oh, did you mean to have Jazz connect to a non-oauth enabled OSLC endpoint? I misunderstood a bit. Let’s hear from the Jazz experts! –Andrew. On 24 Feb 2023, at 15:00, Jad El-Khoury <jad@...> wrote: Correction: Is it possible to connect Jazz to an OSLC Provider that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) From: oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury Sent: Friday, 24 February 2023 14:56 To: oslc-op@... Subject: [oslc-op] Integrating with Jazz - for a client without oauth support Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member
Jad El-Khoury #1188 Thank you very much Ed. I recall very well now that you say it. But I don’t believe this is written anywhere - yet? hopefully this will be part of the Linking Profile? This gives me the (undesirable) answer for what I was looking for. (the outgoing option). Has it been a Java application, I could have helped because Lyo handles oauth1. Unfortunately, we are dealing with a .Net application. Interesting to see if I can motivate trying to look for an oauth1 library. regards Jad toggle quoted message Show quoted text From: Gentry, Edward <e.gentry@...> Sent: Friday, 24 February 2023 16:20 To: oslc-op@...; Jad El-Khoury <jad@...> Subject: RE: [oslc-op] Integrating with Jazz - for a client without oauth support Hi Jad, Jazz has different options depending on whether the REST calls are incoming or outgoing from the perspective of Jazz. Incoming: e.g. GET a Jazz resource, POST a modified Jazz resource, GET a Jazz service provider catalog, etc Jazz auth : this is very much like Basic Auth just the Jazz way. It is well documented on Jazz.net OAuth 2.0: IF Jazz is configured to use the Jazz Authentication Server (basically a profile of the Liberty server) then you can use OAuth 2.0 to make call on the Jazz server. Outgoing: e.g. Jazz does a GET of a resource compact rendering, or Jazz does a GET on local configuration resource, or LDX/LQE does a GET of another TRS resource etc. OAuth 1.0A *and absolutely nothing else. This was underscored very strongly several months ago. Probably not good news … you might be SOL here … :/ Cheers, Ed From:* oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury via lists.oasis-open-projects.org Sent: Freitag, 24. Februar 2023 15:41 To: oslc-op@... Subject: Re: [oslc-op] Integrating with Jazz - for a client without oauth support Thanks Andrii and Michael But yes, Jazz is the client this time. So, I Jazz, I need to setup the friendship to this other application (acting as an OSLC Server). The application is written in .Net (So all the Lyo-related libraries and code are of no use). Regards Jad From: Andrii Berezovskyi <andriib@...> Sent: Friday, 24 February 2023 15:03 To: oslc-op@...; Jad El-Khoury <jad@...> Subject: Re: [oslc-op] Integrating with Jazz - for a client without oauth support Oh, did you mean to have Jazz connect to a non-oauth enabled OSLC endpoint? I misunderstood a bit. Let’s hear from the Jazz experts! –Andrew. On 24 Feb 2023, at 15:00, Jad El-Khoury <jad@...> wrote: Correction: Is it possible to connect Jazz to an OSLC Provider that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) From: oslc-op@... <oslc-op@...> On Behalf Of Jad El-Khoury Sent: Friday, 24 February 2023 14:56 To: oslc-op@... Subject: [oslc-op] Integrating with Jazz - for a client without oauth support Hej Is it possible to connect to Jazz from a client that cannot support oauth (neither 1 nor 2)? The easiest option is to use Basic Authentication. (The Jazz installation itself does not connect to any external Authentication Provider) If so, how should the rootservices document look like? I am familiar with this document when it contains the 5 URLs that perform the oauth1 hand-shake. How does it look like when configured for Basic Authentication? Or even auth2? (It seems that I have asked this same question earlier, but that’s the cost of not having things documented/standardized 😊) regards ______________________________ Jad El-khoury, PhD KTH Royal Institute of Technology School of Industrial Engineering and Management, Mechatronics Division Brinellvägen 83, SE-100 44 Stockholm, Sweden Phone: +46(0)8 790 6877 Mobile: +46(0)70 773 93 45 jad@..., www.kth.se
More All Messages By This Member

1 - 8 of 8

1

Previous Topic Next Topic

Home Hashtags Subgroups Calendar Terms